Maintenance And Troubleshooting; Maintenance; Operations Counter - Erreka DINGO Manuel De L'installateur

MAINTENANCE AND TROUBLESHOOTING

1

MAINTENANCE


Before carrying out any maintenance operation, disconnect the device from the power supply.
1 Frequently check the installation in order to discover
any imbalance or sign of deterioration or wear. Do
not use the operator if any repair or adjustment is
necessary.
2 Clean and lubricate the joints and tracks of the gate,
so as not to increase the strain of the operator.
2

OPERATIONS COUNTER

1 Press ENTER to access the main programming menu.
The display lights up and D1 flashes.
2 Press the buttons ^ and
ç.

D3 and D4 show the number of operations
carried out (hundreds of operations).
D1 D2 Parameter
ç 1
Operations carried out
until D1 shows the letter
V
D3 D4
X X
3 Check that the key devices, strips and photocells, as
well as their installation, have not suffered any
damage from the weather or external agents.
4 Check unlocking can be carried out easily.
5 Check the operations in the display (see "Operations
counter" below).
3 Press ESC to return.
Default option Options or values
Indicates the hu ndred s of cycles
completed (for example,
6,800 cycles completed
68
indicates
)
DINGO operator for sliding gates
English
59