Technical Description; Design; Functional Description; Functional Description Of The Thermal Insulation Cover - oventrop Regudis W-HTE Notice D'utilisation

Technical description

3. Technical description

3.1 Design

1
2
Abb. 1: Design of the assembled thermal
insulation cover
(1) Ventilation grille
(2) Cover for heat exchanger (removable)
(3)
Cover for heat meter (removable)
(4)
Cover for potable water circulation
module (removable)

3.2 Functional description

3.2.1 Functional description of the
thermal insulation cover
The thermal insulation cover has a modular
design and reduces heat loss from the dwelling
station. Continuous circulatory operation in
particular causes an increase in the heat input
to the station.
The thermal insulation cover can be opened
over the areas where the heat exchanger and
heat meter are located.
Potable water temperatures above 60°C
increase the risk of calcification and corro-
sion – especially in the area around the heat
exchanger.
The cover (2) can be replaced with a ventilation
grille (1) in the area over the heat exchanger.
18
3.3
Transport the product in the original packaging.
The product must be stored under the following
conditions:
3 4
Thermal insulation cover

Transport and storage

Temperature range
Relative air hu-
midity
Particles
Mechanical influ-
ences
Radiation
Chemical influ-
ences
-20°C to +60°C
Max. 95%
Dry and free from
dust
Protected from me-
chanical agitation
Protected from
UV rays and direct
sunlight
Do not store together
with solvents, chem-
icals, acids, fuels or
similar substances
134447080-V01.02.2019