Ball valve connector block
3.
Technical description
3.1
Construction
5
Illustr. 1: Ball valve connector block
(1)
Connection thread G¾ male thread (connection
to the station)
(2)
Locking spring
(3)
Handle
(4)
Connection thread Rp¾ female thread
(connection to the pipework)
(5)
Fixing plate
2
3
1
Illustr. 2: Connection assignment
(1)
Hot water outlet
(2)
Heating circuit return
(3)
Heating circuit supply
(4)
Primary supply from buffer storage
cylinder
(5)
Primary return to buffer storage cylinder
(6)
Cold water outlet
(7)
Cold water supply from house connection
Black
Hot water
Grey
Cold water
134448080-V03.02.2019
1
2
3
4
4
5
6
7
3.2
Functional description
The flow is isolated by a ball inside the ball valve by
turning the handle.
A bypass between the primary supply and return
can be opened with the help of the "Flypass" fitting.
This way, the primary circuit in the flow direction in
front of the fitting can be flushed even if the "Regudis
W-HTE" is not fitted.
Illustr. 3: Flow direction "Flypass" fitting
Illustr. 4: Flow direction "Flypass" fitting flushing
3.3
Technical data
Nominal diameter
Nominal pressure
rating
Material
Body
Ball
Seal ball seat
Technical description
DN20
PN 16
Brass
Brass chrome plated
PTFE
17