Safety-Related Information; Normative Directives; Correct Use; Modifications To The Product - oventrop 1344480 Notice D'utilisation

Safety-related information

2. Safety-related information
2.1

Normative directives

Observe the legal framework conditions valid at the
installation location.
The current standards, rules and guidelines are valid.
2.2

Correct use

Safety in operation is only guaranteed if the product
is used correctly.
The ball valve connector block serves the isolation
of all connections of the dwelling station "Regudis
W-HTE".
Item no. 1344485 additionally features a "Flypass"
fitting. The "Flypass" fitting is used for the isolation
and flushing of the primary supply and return in the
flow direction in front of the fitting.
Any other use of the product will be considered as
non-compliant and misuse.
Claims of any kind against the manufacturer and/
or his authorised representatives, due to damages
caused by incorrect use cannot be accepted.
The observance of the operating instructions is part
of the compliance terms.
2.3

Modifications to the product

Modifications to the product are not allowed. In
case of modifications to the product, the warranty
will become void. The manufacturer will not accept
liability for damages and malfunctions caused by
modifications to the product.
2.4

Warnings

Each warning contains the following elements:
Warning symbol
SIGNAL WORD
Type and source of danger!
Possible consequences if the danger occurs
or the warning is ignored.
f Possibilities of avoiding the danger.
16
Ball valve connector block
The signal words define the seriousness of the
danger which arises from a situation.
NOTICE
Indicates a situation which may lead to
damage to property if not avoided.
2.5

Safety notes

This product is designed in accordance with the
necessary safety standard of science and technology
and is fail-safe. Nevertheless, there might still be
a residual danger for persons and property during
installation and operation.
2.5.1 Danger in case of inadequate personnel
qualification
Have all work on this product carried out by qualified
tradesmen.
2.5.2

Risk of injury in case of improper work

Angular components points and edges at the outside
and inside of the product may cause injuries.
f Before starting work, make sure that there is enough
space.
f Handle open and hard-edged components with
care.
2.5.3

Availability of the operating instructions

Any person working on the product has to read and
apply these operating instructions and all other valid
documents (e.g. accessory manuals).
The operating instructions have to be kept at the
installation location.
f Hand these operating instructions and all other valid
documents (e.g. accessory manuals) over to the
user.
134448080-V03.02.2019