General Information; Validity Of The Operating Instructions; Extent Of Supply; Contact - oventrop Multidis SFQ Notice D'utilisation

Distributeur/collecteur en acier inoxydable
Masquer les pouces Voir aussi pour Multidis SFQ:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

"Multidis SFQ"
1.

General information

The original operating instructions were drafted
in German.
The operating instructions in other languages
were translated from German.
1.1 Validity of the operating
instructions
These operating instructions are valid for the
stainless steel distributor/collector "Multidis
SFQ" for 2 to 12 surface heating/cooling
circuits.

1.2 Extent of supply

Upon receipt, check delivery for any damages
caused during transit and for completeness.
The delivery includes the following
components:
• Flow distributor
• Return collector
• 2 brackets (only 1 bracket for item no.
1404852)
• 4 screws
• 4 dowels
• 1 presetting key
• 2 ring gaskets for the connection between
the stainless steel distributor/collector and
the ball valve
• Printed tags for marking the heating/
cooling circuit
• Operating instructions

1.3 Contact

Address
OVENTROP GmbH & Co. KG
Paul-Oventrop-Straße 1
D-59939 Olsberg
Germany
Technical service
Phone: +49 (0) 29 62 82-234
140485280-V02.08.2019
General information
1.4 Copyright and protective
rights
These operating instructions are copyrighted
and are exclusively designed for persons
involved with the product.

1.5 Declaration of conformity

Oventrop GmbH & Co. KG hereby declares
that this product was manufactured in
accordance with the basic requirements and
the other relevant provisions of the relevant EC
Directives.
The declaration of conformity can be obtained
from the manufacturer.

1.6 Used symbols

Important information and further
explanations
Action required
f
Enumeration
1.
Fixed order. Steps 1 to X.
2.
Z
Result of action
2.

Safety-related information

2.1 Normative directives

The constructional and commercial regulations
as well as the regulations relating to water must
be observed during installation.
The current standards, regulations and
guidelines are applicable.
• DIN EN 1264
• DIN 18380
• VDI 2035
• DIN EN 16313

2.2 Correct use

Safety in operation is only guaranteed if the
product is used correctly.
The stainless steel distributor/collector
"Multidis SFQ" serves the central distribution
EN
19

Publicité

Table des Matières
loading

Table des Matières