Tiling ready frame for the dwelling station Regudis W-HTE
1.
General information
The original operating instructions were drafted in
German.
The operating instructions in other languages have
been translated from German.
1.1
Validity of the operating instruction
These operating instructions are valid for the tiling
ready frame for the dwelling station Regudis W-HTE
1.2
Extent of supply
Please check your delivery for any damage caused
during transit and for completeness.
Items included in the delivery:
• Tiling ready frame
• Fixing brackets
• Tab for opening the tub-shaped door
• Suction cup
• Operating instructions
1.3
Contact
Contact address
OVENTROP GmbH & Co. KG
Paul-Oventrop-Straße 1
59939 Olsberg
GERMANY
www.oventrop.com
Technical services
Phone: +49 (0) 29 62 82-234
1.4
Declaration of conformity
Oventrop GmbH & Co. KG hereby declares that this
product complies with the basic requirements and
other relevant provisions of the EU Directives con-
cerned.
1.5
Symbols used
Important information and further explanations.
Action required
f
•
List
1.
Fixed order. Steps 1 to X.
2.
Result of action
Z
134409880-V01.07.2020
2.
Safety-related information
2.1
Correct use
Operating safety is only guaranteed if the product is
used correctly.
The tiling ready frame is used in combination with
the dwelling station Regudis W-HTE. In case of
flush-mounting installation of the dwelling station,
the tiling ready frame provides easy access to the
dwelling station. The tiling ready frame sits flush with
the wall and can be adapted to the wall covering.
Any other use of the product will be considered as
non-compliant and misuse.
Claims of any kind against the manufacturer and/or
its authorised representatives due to damage caused
by incorrect use will not be accepted.
Observance of the operating instructions is part of
compliance with correct use.
2.2
Warnings
Each warning contains the following elements:
Warning symbol
SIGNAL WORD
Type and source of danger
Possible consequences if the danger occurs
or the warning is ignored.
f Ways to avoid the danger.
The signal words identify the severity of the danger
arising from a situation.
NOTICE
Indicates a situation that may lead to damage
to property if not avoided.
2.3
Safety notes
We have developed this product in accordance with
current safety requirements.
Please observe the following notes concerning safe
use.
2.3.1
Danger caused by inadequately qualified
personnel
Any work on this product must only be carried out by
qualified tradespeople.
2.3.2
Risk of injury in case of improper work
Angular components, protrusions and edges both
inside and outside the product may cause injuries.
f Before starting work, make sure that there is
enough space.
General information
15