Risk Of Injury In Case Of Improper Work; Availability Of The Operating Instructions; Technical Description; Construction - oventrop Multidis SFQ Notice D'utilisation

"Multidis SFQ"
2.6.5 Risk of injury in case of improper
work
Stored residual energies, angular components
points and edges at the outside and inside of
the product may cause injuries.
f Before starting work, make sure that there
is enough space.
f Open and hard-edged components are to
be handled with care.
f Make sure that the work place is tidy and
clean to avoid accidents.
2.6.6 Availability of the operating
instructions
These operating instructions and all other
documents (e.g. accessory manuals) have to
be read and applied by any person working on
the product.
The operating instructions have to be kept at
the installation location.
Hand these operating instructions and all other
valid documents (e.g. accessory manuals) over
to the user.
140485280-V02.08.2019

Technical description

3. Technical description

3.1 Construction

1
2
5
Illust. 1: Construction flow distributor
(1) Collar nut G 1
(2) Flow indicator
(3) Fill and drain valve G ¾
(4) Flow distributor
(5)
Connection nipple G ¾ male thread
(cone "Euro" according to DIN EN
16313)
4
3
21
EN