Maintenance; Scheduled Maintenance Table - Nilfisk Advance SR 1500H B Manuel D'emploi Et D'entretien

USE AND MAINTENANCE MANUAL

MAINTENANCE

The lifespan of the machine and maximum operating safety are ensured by correct, regular maintenance.
The following table summarises the routine maintenance required. The intervals indicated can be changed to suit working
conditions. These must be defined by the person in charge of maintenance.
WARNING!
Maintenance operations must be carried out when the machine is off (on/off switch key removed).
Moreover, carefully read the instructions in the Safety chapter.
All routine or extraordinary maintenance operations must be performed by skilled personnel, or by an authorised Service
Centre.
This Manual describes only the easiest and most common maintenance procedures.
NOTE
For other maintenance procedures contained in the Scheduled Maintenance Table or for extraordinary
maintenance operations refer to the specific Service Manual that can be consulted at any Service
Centre.

SCHEDULED MAINTENANCE TABLE

Maintenance operation
Battery fluid level check
Hydraulic oil level check
Side and main brush height check
Dust filter cleaning and integrity check
Skirt height and operation check
Filter-shaker operation check
Wheel drive gearing chain tension check and
cleaning
Brake adjustment
Bolts and nuts tightness check and leakage check
Steering chain tension check and cleaning
Electric motor brushes (or carbon brushes) check
and replacement
Hydraulic oil filter replacement
Hydraulic oil replacement
(*): for the related procedure refer to the Service Manual.
(1): or before each start.
(2): and after the first 8 running-in hours.
(3): the first time after 500 hours, then after 2,000 hours or every year.
10
Every 10 Every 50
On delivery
hours
(1)
(1)
Every 100 Every 400
hours hours hours
(*)
(*)
(*)
(*) (2)
(*)
(*)
146 1633 000(3)2004-05 A
Every
Long
1000
periods
hours
(*)
(*) (3)