Lamborghini Caloreclima Reply 51 Instructions D'utilisation, D'installation Et D'entretien page 84

System type menu
Press the Summer/Winter button for 10 seconds to access the system Type Menu. 21 parameters, modifiable only from
card, are available.
Remote Card DescriptionTransparent Parameters
control
NO P01 Heating request selection
NO P02 Cascade sensor selection
NO P03 Not used
NO P04 3-way valve time
NO P05 Cascade timer seconds (Active only for 71/101)
NO P06 Cascade timer minutes (Active only for 71/101)
NO P07 Activation power (Active only for 71/101)
NO P08 Deactivation power (Active only for 71/101)
NO P09 Hydraulic separator function
NO P10 System filling function
NO P11 3-way valve selection
0-10Vdc Heating OFF voltage (Control in Tem-
NO P12
perature)
0-10Vdc Heating ON voltage (Control in Tem-
NO P13
perature)
NO P14 0-10Vdc Max. Voltage (Control in Temperature)
0-10Vdc Min. Temperature (Control in Tempera-
NO P15
ture)
0-10Vdc Max. Temperature (Control in Temper-
NO P16
ature)
0-10Vdc Heating OFF voltage (Control in
NO P17
Power)
NO P18 0-10Vdc Heating ON voltage (Control in Power)
NO P19 0-10Vdc Max. Power (Control in Power)
NO P20 0-10Vdc Min. Power (Control in Power)
NO P21 0-10Vdc Max. Power (Control in Power)
Press the Heating buttons to scroll the list of parameters in increasing or decreasing order. Press the DHW buttons to
modify the value of a parameter: the change will be automatically saved.
Press the Summer/Winter button for 10 seconds to exit the system Type Menu.
84
Range
0-4
0=Disabled, 1=Enabled
Do not modify
0-255 seconds
00-59 seconds
0-255 minutes
0-100%
0-95%
0=Disabled, 1=Enabled
0=Disabled, 1=Enabled
0=Internal, 1=External
0-100
0-100
0-100
0-100
0-100
0-100
0-100
0-100
0-100
0-100
cod. 3540H322 - 09/2008 (Rev. 01)
Reply 51 - 71 - 101
Default
0
0=Disab.
0
0 seconds
0
1
15%
5%
0=Disab.
0=Disab.
0=Internal
25 (Volt/10)
30 (Volt/10)
100 (Volt/10)
20 (°C)
90 (°C)
25 (Volt/10)
30 (Volt/10)
100 (Volt/10)
0 (%)
100 (%)
EN