Lamborghini Caloreclima Reply 51 Instructions D'utilisation, D'installation Et D'entretien page 73

Reply 51 - 71 - 101
B
Before installing the flues, open the cabinet and fill the trap with approx. 0.5 l. of water through the flue con-
nections (see fig. 30) A and B for the model and Reply 71/i-101/ionly A the model Reply 51/i.
B
For outside installations make the seal 1 adhere perfectly to the top part of the cabinet, to prevent possible
infiltration of rain and atmospheric agents.
Connection with manifolds
To connect one or more modules in bank to a single flue, it is advisable to use the special manifolds (optionals) indi-
cated in the table. The choice of diameter must be made according to the total power of the bank of units, respecting
that given in the table. Use a starting kit for each bank and a suitable number of extension kits.
The starting kits have a special accessory inside them for connection also to modules Reply 51/i. 90° bends and man-
ifold extensions are also available for the flue connection.
Bank heating capacity
Up to 150 kW
150 - 300 kW
300 - 500 kW
EN
fig. 30 - Filling the trap
Manifold diameter Starting kit
125 mm 041008X0
160 mm 041009X0
200 mm 041010X0
cod. 3540H322 - 09/2008 (Rev. 01)
Manifold extension
Extension kit Male-female
1000 mm
041020X0 041017X0
041011X0 041018X0
041012X0 041019X0
90° bend
for manifold
041014X0
041015X0
041016X0
73