Alternative Installation Methods - Stiebel Eltron DHE Connect 18 Utilisation Et Installation

INSTALLATION
Alternative installation methods

14. Alternative installation methods

Electrical connection
On unfinished walls, connected from above
On unfinished walls, connected from below, short
power cable
On finished walls
Water connection
On finished walls
Other
Installation with offset tiles
Pivoting appliance cover
WARNING Electrocution
Before any work on the appliance, disconnect all poles
from the power supply.
14.1 Internal anti-scalding protection
CAUTION Burns
If operating with preheated water, the set temperature
limit and internal anti-scalding protection may be in-
effective.
In this case, limit the temperature with an upstream cen-
tral thermostatic valve.
92 |DHE Connect | DHE Touch
The appliance is equipped with an anti-scalding protection func-
tion, which the qualified contractor can set if required. To do this,
IP rating
the appliance must be opened.
IP 25
Anti-scalding protection activation
IP 25
f Press the "Service" button on the PCB in the appliance. f
IP 24
IP rating
IP 24
IP rating
IP 25
IP 25
1 "Service" button in the appliance
The "Internal anti-scalding protection" (in the "Settings / Service"
menu) is visible for 5 minutes.
f Set the anti-scalding protection temperature. f
f Tap on "Active" and then the tick symbol to enable anti-scald- f
ing protection.
Setting
20 - 60
43
50
55
60
1
Description
Setting range (= temperature in °C)
For example in nurseries, hospitals, etc.
Max. for shower operation
Factory setting
www.stiebel-eltron.com