Stiebel Eltron DHE Connect 18 Utilisation Et Installation page 108

INSTALLATION
Specification
18.5 Pressure drop
Taps
Tap pressure drop at a flow rate of 10 l/min
Mono lever mixer tap, approx.
Thermostatic valve, approx.
Shower head, approx.
18.8 Energy consumption data
Product datasheet: Conventional water heaters to regulation (EU) no. 812/2013 and 814/2013
Manufacturer
Load profile
Energy efficiency class
Energy conversion efficiency
Annual power consumption
Default temperature setting
Sound power level
Special information on measuring efficiency
Daily power consumption
108 |DHE Connect | DHE Touch
MPa 0.04 - 0.08
MPa 0.03 - 0.05
MPa 0.03 - 0.15
DHE Connect 18/21/24
234467
STIEBEL ELTRON
S
A
% 39
kWh 480
°C 60
dB(A) 15
Measured at ECO level at
highest flow rate, max- highest flow rate and max-
imum output and maxi-
mum set value.
kWh 2,211
Sizing the pipework
When calculating the size of the pipework, an appliance pressure
drop of 0.1 MPa is recommended.
18.6 Fault conditions
In the event of a fault, loads up to 80 °C at a pressure of 1.0 MPa
can occur briefly in the installation.
18.7 Test symbols
See type plate on the appliance.
DHE Connect 27 DHE Touch 18/21/24
234468
STIEBEL ELTRON
S
A
39
481
60
15
Measured at ECO level at Measured at ECO level at
highest flow rate, max-
imum set value imum output and maxi-
2,217
DHE Touch 27
234459
STIEBEL ELTRON STIEBEL ELTRON
S
A
39
480
60
15
Measured at ECO level at
highest flow rate and max-
imum set value
mum set value.
2,211
www.stiebel-eltron.com
234460
S
A
39
481
60
15
2,217