Stiebel Eltron DHE Connect 18 Utilisation Et Installation page 86

INSTALLATION
Standard installation
Preparing the power cable
160
30
1 Cable entry installation aid
f Prepare the power cable. f
Fitting the wall mounting bracket
f Mark out the holes for drilling using the installation tem- f
plate. If the appliance is to be installed with water connec-
tions on finished walls, also mark out the fixing hole in the
lower section of the template.
f Drill the holes and secure the wall mounting bracket at 2 f
points using suitable fixing materials (screws and rawl plugs
are not part of the standard delivery).
f Fit the wall mounting bracket. f
86 |DHE Connect | DHE Touch
Installing the twin connectors
1
f Seal and insert the twin connectors.
Making the water connection
1 DHW with tee
2 Gasket
3 Cold water with 3-way ball shut-off valve
Material losses
!
Carry out all water connection and installation work in
accordance with regulations.
f
2
2
1
3
24
5 Nm
5 4
www.stiebel-eltron.com