Service Information - Stiebel Eltron DHE Connect 18 Utilisation Et Installation

INSTALLATION
Service information
14.15 Pairing the DHE programming unit as a
wireless remote control
If the programming unit is used outside the appliance with acces-
sories and the appliance is closed with the dummy cap, then you
must open the appliance to pair the programming unit.

15. Service information

Settings
Menu structure
 „ Service
…  Fault
…  Contractor contact
…  Appliance details
100 |DHE Connect | DHE Touch
2 1
Description
Display when faults are present.
Storing data
Type | Product ID | QR code. The QR code enables fast access to our internet site from a mobile terminal de-
vice (smartphone or tablet).
1 Wireless module button for pairing
2 Yellow LED illuminates when programming unit is active
f Activate the "Settings / Service / Wireless / Pair programming f
unit" menu item on the programming unit.
f Briefly press the wireless module button in the appliance. f
The yellow LED starts to flash. The wireless module remains
in pairing mode for 30 seconds.
f Press "OK" on the programming unit. f
14.16 Unpairing all wireless subscribers
f To unpair all wireless subscribers, press the button and hold f
for 5 seconds.
www.stiebel-eltron.com