Disposal - Dometic TEC Série Instructions De Montage

Disposal

10.3 Creating a priority circuit
You can create a priority circuit using a changeover relay whereby the external
voltage supply has priority over the generator, see circuit diagram (fig. j, page 12):
Item Description
1 User load
2 AG169 changeover relay
3 Inverter
4 Mains
➤ Mount the changeover relay in a suitable position.
➤ Connect the wires following the circuit diagram (fig. j, page 12).
10.4 Connecting the control panel
➤ Connect the control panel to the connection box of the inverter using the
extension cable provided on the plug for the control panel (fig. j 7, page 12).
10.5 Connecting the float (only TEC60)
➤ Connect the float from the tank to the float connection (fig. k 1, page 12).
11 Disposal
➤ Place the packaging material in the appropriate recycling waste bins wherever
possible.
M
If you wish to finally dispose of the product, ask your local recycling centre
or specialist dealer for details about how to do this in accordance with the
applicable disposal regulations.
26
TEC60, TEC60LPG
EN