Setting Up The Projector; Displaying The Setting Window - Sony SRX-S110 Manuel D'installation

4
Fix the AC power cord securely with the cable clamp
and the two screws removed in step 2.
5
Replace the terminal cover using the two screws
removed in step 1.
10

Setting Up the Projector

Setting Up the Projector
After installing the supplied SRX Controller in a computer
for controlling the projector, display the Control Function
Menu window, open the SETTING window, and set the
functions of the projector.
For details on the Control Function Menu window, see
page 22.

Displaying the SETTING Window

1
Click the SETTING button on the Control Function
Menu window.
The authentication dialog appears.
2
Enter the password in the Password text box, and click
the OK button.
The default setting of the password is "setting."
The SETTING window opens.
Setting items
3
Click the desired setting item on the left of the
window.
The selected setting window opens.
When you have completed the settings in each
window
Click the APPLY button at the lower part of each window.
The settings are registered.