Service And Maintenance - Festool CTL 26 E AC HD Notice D'utilisation

8.3 Extracting wet materials/liquids
Remove the filter or disposal bag!
Recommendation: use special wet filter
(NF-CT).
The dust extractor stops automatically when
the maximum level is reached.
After wet extraction, allow the main filter to dry!
CAUTION
Escaping foam and fluids
► Switch off and empty the machine immedi­
ately.
8.4 After finishing work
► Clean the main filter automatically or man­
ually (see Chapter
► Switch off the mobile dust extractor and
pull out the mains plug.
► Wind up the mains power cable, secure the
end of the cable in the slot [5].
► Empty the dirt trap.
► Place the mobile dust extractor in a dry
room inaccessible to unauthorised users.
► Fold up the hose holder [1-10].
► Wind the hose around the bracket on the
hose holder.
► Push the end of the hose over the bracket.
► Dust class M only: close the intake opening
[1-7] with the sealing plug [1-1] or closing
slide [1-16].
WARNING
Hazardous dust
Damage to the respiratory passage
► Clean the mobile dust extractor and all ac­
cessories thoroughly using the extractor
(inside and out) and wipe down before re­
moving from the working area (dust class
M only).
► Parts that you were not able to clean thor­
oughly must be sealed in an airtight plastic
bag prior to transportation.
► Wear a dust mask.
8.1 ).

9 Service and maintenance

WARNING
Risk of injury, electric shock
► Always disconnect the mains plug from the
socket before performing maintenance
work on the machine!
► All maintenance and repair work which re­
quires the motor housing to be opened
must only be carried out by an authorised
service workshop.
Customer service and repair only through
manufacturer or service workshops: Please
find the nearest address at: www.festool.com/
service
EKAT
4
5
3
2
1
Only use original Festool spare parts! Order No.
at: www.festool.com/service
Clean the level sensors regularly [6], check for
damage and empty the dirt trap [1-3].
Damaged safety devices and components must
be repaired or replaced in a recognised special­
ist workshop, unless otherwise indicated in the
operating manual.
Observe the following instructions:
– The manufacturer or an instructed person
must perform a dust test at least once a
year to determine whether the filter is
damaged, the machine is sealed properly
and the monitoring features are functioning
correctly.
– Anything that cannot be cleaned must be
discarded in impermeable bags. Observe
applicable disposal regulations!
– For user servicing, the machine must be
dismantled, cleaned and serviced, as far as
is reasonably practicable, without causing
risk to the maintenance staff and others.
Suitable precautions include, decontamina­
tion before dismantling, provision from lo­
cal filtered exhaust ventilation where the
machine is dismantled, cleaning of the
maintenance area and suitable personal
protection.
English
17