Cleaning And Servicing; Dishwasher-Safe Components; Cleaning Products; Cleaning The Base Unit - Bosch VitaPower 4 Serie Manuel D'utilisation

en Cleaning and servicing
Insert the seal for the lid.
3.
→ Fig.
25
Close the mouthpiece on the lid.
4.
→ Fig.
25
Screw the lid and the To-Go
5.
blender jug in tightly.
→ Fig.
25

Cleaning and servicing

Cleaning and servicing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.

Dishwasher-safe components

Find out here which components can
be put in the dishwasher.
ATTENTION!
Some parts may be damaged if they
are put in a dishwasher.
Only put dishwasher-safe parts in
▶
the dishwasher.
Only use programmes that do not
▶
heat the water above 60 °C.
Do not wedge plastic parts in the
▶
dishwasher.
This overview describes the cleaning
process for the components.
→ Fig.
26

Cleaning products

Find out here which cleaning
products are suitable for your appli-
ance.
ATTENTION!
Using unsuitable cleaning agents or
incorrect cleaning may damage the
appliance.
Do not use cleaning agents con-
▶
taining alcohol or spirits.
Do not use sharp, pointed or metal
▶
objects.
36
Do not use abrasive cloths or
▶
cleaning agents.

Cleaning the base unit

WARNING
Risk of electric shock!
An ingress of moisture can cause an
electric shock.
Never immerse the appliance or
▶
the power cord in water or clean in
the dishwasher.
Do not use steam- or high-pres-
▶
sure cleaners to clean the appli-
ance.
Wipe down the base unit with a
▶
soft, damp cloth.
Cleaning the blender
WARNING
Risk of cutting!
The blender knife has sharp blades.
When cleaning and emptying the
▶
blender jug, watch out for the
sharp blades.
Never touch the edges of the
▶
blades with bare hands.
ATTENTION!
The blender knife has sharp blades.
Improper handling may damage the
blades or the surface.
Never set the blade insert down
▶
with the blade facing downwards.
Remove the measuring jug.
1.
→ Fig.
27
Remove the lid.
2.
→ Fig.
27
Turn the blender jug anti-clockwise
3.
and remove it from the base unit.
→ Fig.
28
Turn the blender jug upside down.
4.
Open the retaining bracket.
5.
→ Fig.
29