Materials; Environmental Parameters - Invacare Aquatec R Manuel D'utilisation

Aquatec® R / F / XL
1) 11.1 V DC / 44 VA valid when using hand controls with
voltage 11.1 V, indicated on the back of the hand control.
10.95 V DC / 44 VA valid when using hand controls with
voltage 10.95 V, indicated on the back of the hand control.
10.8 V DC / 43 VA valid when using hand controls with
voltage 10.8 V, indicated on the back of the hand control.
2) Protected against the penetration of water in the event
of strong jets of water, tested under stipulated weather
conditions.
3) Dust-proof and protected against the penetration of water
during temporary immersion.
4) Protected against the penetration of water in the event
of strong jets of water.

10.3 Materials

Backrest
Seatplate
Covers
All materials used are corrosion resistant and latex
free.

10.4 Environmental Parameters

Operating conditions
Ambient temperature
Relative humidity
Atmospheric pressure
28
PPGF
PPGF
PVC
10 - 40 °C
15 % - 93 %, non-condensing
795 - 1060 hPa
Storage and shipping conditions
Ambient temperature
Relative humidity
Atmospheric pressure
0 - 40 °C
30 % - 75 %, non-condensing
795 - 1060 hPa
1574470-E