Wilo Stratos GIGA Série Notice De Montage Et De Mise En Service page 80

English
1
Fig. 10: Pump assembly
Rating plates
2
Fig. 11: Arrangement of the rating plates:
Pump rating plate, electronic module rating
plate
74
No.
12
13
14
15
16
17
18
19
20
20a
20b
21
22
23
Tab. 2: Arrangement of the main components
3
4
2
• The pump rating plate (Fig. 11, Item 1) includes the serial number
• The electronic module rating plate (electronic module = inverter or
1
Part
Rotating unit of the mechanical seal (mechanical seal)
Pressure measuring line
Pump housing
Impeller nut
Impeller
Stationary ring of the mechanical seal (GLRD)
Protective plate
Ventilation valve
Transport eye
Attachment points for transport eyes at the motor flange
Attachment points for transport eyes at the motor housing
Fastening screws of the electronic module
Electronic module
Valve (for double pump)
The typical characteristic of the Stratos GIGA series is the jacket cool-
ing of the motor. The air current is optimally conducted by the long
fan cover (Fig. 10, Item 1) for cooling the motor cooling and the elec-
tronic module.
(Fig. 10, Item 2) shows the pump housing with a special lantern chan-
nel to reduce the load of the impeller.
The transport eyes (Fig. 10, Item 3) are to be used in accordance with
chapters 3 "Transport and interim storage" on page 69 and 10 "Main-
tenance" on page 110.
The window in the lantern that is covered with the protective plate
(Fig. 10, Item 4) is used for maintenance work in accordance with
chapter 10 "Maintenance" on page 110. The window can also be used
to check for leaks with consideration of the safety regulations in
accordance with chapter 9 "Commissioning" on page 106 and chapter
10 "Maintenance" on page 110.
The Wilo-Stratos GIGA has three rating plates:
(Ser.-No.../...), which is, for example, required for spare parts ordering.
frequency converter) (Fig. 11, Item 2) indicates the designation elec-
tronic module being used.
WILO SE 10/2017