Cord, Hose And Accessory Storage; Maintenance; Cleaning Vac Filter - RIDGID WD40700 Mode D'emploi

SP6732-2 4 gallon ES 9/11/12

Cord, Hose and Accessory Storage

1. Your Vac has a convenient area to
store your power cord and Vac hose.
2. Wrap the power cord around the top of
the handle on the Vac and attach the
end of the plug to the cord.
3. Wrap the hose around the Vac as
shown and place the small swivel end
inside the larger one.
4. The car nozzle is stored in the car
nozzle compartment located on top of
the handle.
5. The storage bin holds the utility nozzle
and two extension wands.
Empty Storage Bin
Storage Bin
Filled Storage Bin
Extension Wand
Placement

Maintenance

! WARNING: To assure product
SAFETY and RELIABILITY, repairs
and adjustments should be
performed by Authorized Service
Centers, always using RIDGID
replacement parts.
12:51 PM Page 8
Car Nozzle
Compartment
Handle
Extension Wand
Placement
Utility Nozzle
Placement
Storage
Accessory
Bin
Storage Pins
Utility Nozzle
Placement

Cleaning Vac Filter

WARNING: To reduce the risk of
!
injury from accidental starting,
unplug power cord before changing
or cleaning filter or foam pad.
NOTE: The filter is made of high quality
paper designed to stop very small particles
of dust. The filter can be used for dry pick
up or small amounts of liquid. Handle the
filter carefully when removing to clean or
installing it. Creases in the filter pleats may
occur from installation but will not affect the
performance of the filter.
8
Hose
Storage
Area
Accessory
Storage Bin
Power
Cord