Accessory Storage; Operation - RIDGID WD64250 Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Accessory Storage

1. Slide the extension wands onto the
posts of the caddy feet for storage.
2. Place each accessory (utility nozzle
and wet nozzle) onto the top of each
extension wand for storage.
3. To remove wands and accessories,
lightly rotate and pull upward.

Operation

WARNING: To reduce the risk of fire, explosion, or damage to vac:
• Do not leave vac running while unattended - you may fail to notice
important signs indicating abnormal operation such as loss of suction,
debris/liquid exiting the exhaust, or abnormal motor noises. Immediately
stop using vac if you notice these signs.
• Do not leave vac plugged in when not in use.
• Do not continue running when float has cut off suction.
• Sparks inside the motor can ignite airborne flammables. Do not operate vac
near flammable liquids or in areas with flammable gases, vapors, or
explosive/airborne dust. Flammable liquids, gases, and vapors include:
lighter fluid, solvent-type cleaners, oil-based paints, gasoline, alcohol, and
aerosol sprays. Explosive dusts include: coal, magnesium, aluminum,
grain, and gun powder.
• Do not vacuum up explosive dusts, flammable liquids, or hot ashes.
WARNING: To reduce the risk of electric shock or injury:
• Do not expose to rain or allow liquid to enter motor compartment. Store
indoors.
• Do not handle plug, switch, or vac with wet hands.
• Unplug vac before servicing. If your vac is not working as it should, has
missing parts, has been dropped, damaged, left outdoors, or dropped into
water, return it to an independent service center or call customer service.
• When using an extension cord, use only outdoor-rated cords that are in
good condition. Do not allow the connection to come into contact with
liquid.
7
Wet
Nozzle
Utility
Nozzle
Extension
Wands (2)
Caddy Feet

Publicité

Table des Matières
loading

Table des Matières