SDMO AT206 Manuel D'utilisation page 56

Press the MEAS button 4 times
The screen displays "- - - -"
Press the START button once
The screen displays "SET"
Then the screen displays "P1.01"
Displaying the parameters
Press the MEAS button to change the parameter for a single generating set.
Example: GENERATING SET 1 → P1...
1. Parameters "P1.01"
2. Press the MEAS button
3. The screen displays "P1.02"
4. Press the MEAS button
5. The screen displays "P1.03"
Press the MAN button to change the generating set.
Example: GENERATING SET 1(P1...) → GENERATING SET 2... (P2...) → GENERATING SET (P8...)
1. The screen displays "P1.03"
2. Press the MAN button
3. The screen displays "P2.01"
4. Press the MAN button
5. The screen displays "P3.01", etc.
22 / 32