Basic Operation - Teac AD-850 Mode D'emploi

Turning the unit on or off
Press the POWER button to turn the unit on or off.
When the unit turns on, the display lights.
Check the POWER ON START switches that determine what the
unit does when the power is turned on.
When the power is turned on, and the POWER ON START
OFF-PLAY-REC (TAPE) switch for the timer is set to PLAY
or REC
The source set with the POWER ON START CD-TAPE-USB
switch starts playback/recording.
The timer recording can only record to cassette tape (page
37).
When the power is turned on, and the POWER ON START
OFF-PLAY-REC (TAPE) switch for the timer is set to OFF
The source set with the POWER ON START CD-TAPE-USB
switch becomes the active source.
< When you do not want to use the timer, be sure to set the
POWER ON START OFF-PLAY-REC (TAPE) switch to the OFF
position to prevent accidentally recording over an important
cassette tape.

Basic operation

or
Selecting a source for playback/recording
Each time the SOURCE button is pressed, the source changes as
follows:
The selected source is shown on upper left of the display.
< During recording, the source cannot be changed.
< Pressing the play button for a source also selects and starts
playback of that source.
< Select "LINE" to use an external source connected to the LINE
connectors.
17