Recording On A Cassette Tape - Teac AD-850 Mode D'emploi

Erasing a file
1
Select the file that you want to delete (page 27).
2
Press the ERASE button.
"Erase File?" appears on the display.
3
Within 6 seconds, press the ERASE button again.
"Erasing" appears on the display, the file currently being played is
erased, and playback stops.

Recording on a cassette tape

This unit can record sound from a CD, USB flash drive, or connected
external device to a cassette tape.
You can record on Normal (type ) and Chrome (type ) tapes with
this unit. Metal (type ) cannot be recorded with this unit.
o You can mix in the sound of a mic connected to this unit when
recording (page 34).
< This unit can also record to a USB flash drive, but it cannot record
to both USB flash drive and tape at the same time.
ATTENTION
Never turn the power off or disconnect the power cord during
recording. Doing so could damage this unit and connected
equipment.
1
Put a cassette tape in the compartment.
< If the erasure prevention tabs of the cassette tape have been
broken off, put pieces of adhesive tape over the hole(s).
2
Press the SOURCE button repeatedly to select the source
to be recorded (CD, USB, or LINE).
Continued on the next page
31