Before Use - Teac AD-850 Mode D'emploi

What's in the box
Confirm that the standard accessories are included.
Remote control (RC-1329) × 1
Batteries (AAA) for remote control × 2
RCA audio cables × 2
Owner's manual (this document) × 1
o For information about the warranty, users living in the USA
and Canada should see pages 124–125 and the back cover
(warranty document). Users living in Europe and other regions
should see page 126.
o Keep this manual in a safe place for future reference.
Quick start guide for recording × 1
Precautions for use
< Do not move the unit during CD playback.
During CD playback, the disc rotates at high speed. Do not lift or
move the unit during playback. Doing so might damage the disc
or the unit.
< The voltage supplied to the unit should match the voltage that
is printed on the rear panel. If you are in any doubt regarding this
matter, consult an electrician.
< Do not open the cabinet as this might result in damage to the
circuitry or electrical shock. If a foreign object should get into the
unit, contact your dealer or service company.
< When removing the power plug from the wall outlet, always pull
directly on the plug, never yank on the cord.
< Always remove the disc before relocating or moving this unit.
Moving the unit with a disc inside it could cause malfunction.
6

Before use

Placement of the unit
< Choose the location where you install the unit carefully. Avoid
placing it in direct sunlight or close to a source of heat. You should
also avoid locations that are subject to vibrations or exposed to
excessive dust, heat, cold or moisture.
< As the unit may become warm during operation, always leave
sufficient space around it for ventilation.
< Do not place the unit on an amplifier, a receiver or any other
device that generates heat.
Beware of condensation
When the unit is moved from a cold to a warm place, or used after a
sudden temperature change, there is a danger of condensation; vapor
in the air could condense on the internal mechanism, making correct
operation impossible. To prevent this, or if this occurs, leave the unit
turned on for one or two hours. Then the unit will stabilize at the tem-
perature of its surroundings.
Using the TEAC Global Site
You can download updates for this unit from the TEAC Global Site:
http://teac-global.com/
1) Open the TEAC Global Site.
2) In the TEAC Downloads section, click the desired language to
open the Downloads website page for that language.
NOTE
If the desired language does not appear, click Other Languages.
3) Click the "Search by Model Name" section to open the Downloads
page for that product. (Users in Europe should click the product
name in the "Products" section instead.)
4) Select and download the updates that are needed.
Product registration
Customers in the USA, please visit the following TEAC website to regis-
ter your TEAC product online.
http://audio.teac.com/support/registration/