Programmed Playback - Teac AD-850 Mode D'emploi

This function can be used in CD and USB modes.
Up to 30 tracks/files can be programmed in the desired order.
1
When playback is stopped, press the PROGRAM button
to enter program mode.
"PROGRAM" blinks and "P-01" appears on the display.
Example when in CD mode
< To stop programming, press the CD/USB Stop (H) button.
2
(When programming MP3 files)
Press the CD/USB FOLDER (
folder, then press the PROGRAM button.
< MP3 files not located in a specific folder are in the "001" (ROOT)
folder.
NOTE
The ROOT folder is the top-level folder.

Programmed playback

/ ) buttons to select a
3
Press the CD/USB Skip ( . or / ) buttons to select a
track/file, then press the PROGRAM button.
The track/file is programmed, and "P-02" is displayed.
< Repeat steps 2 and 3 to program more tracks/files.
< You can program up to 30 tracks/files.
< To stop programming, press the CD/USB Stop (H ) button.
Programming is canceled, but the program contents are
retained in memory. If you want to restart program playback,
press the PROGRAM button, and then press the CD/USB Play
(t) button.
4
When the selection of track/file numbers is completed,
press the CD/USB Play ( t ) button to start program
playback.
To stop program playback, press the CD/USB Stop (H) button.
< After program playback finishes, press the PROGRAM button
and then the CD/USB Play (t) button to play the program
again.
< You can use the CD/USB Skip (. and /) buttons during
program playback to select and play other tracks/files in the
program.
< The shuffle function does not work during program playback.
< "REPEAT 1" and "REPEAT ALL" playback are possible during
program playback. When set to "REPEAT ALL" mode, the
programmed tracks/files will be played repeatedly.
21