Using The Remote Control; Battery Installation; Battery Replacement; Display - Teac AD-850 Mode D'emploi

Using the remote control

Precautions when using the remote control
V
CAUTION
Misuse of batteries could cause them to rupture or leak, which
might result in fire, injury or the staining of nearby materials.
Please read and observe the precautions on page 3 carefully.
o When using the remote control, point it toward the remote control
signal receiver on the main unit from a distance of 5 m (16 ft) or
less. Do not place obstructions between the main unit and the
remote control.
< Even if the remote control is used within its effective range,
operation by remote control might not be possible if there are any
obstacles between the unit and the remote control.
< If the remote control is operated near other devices that generate
infrared rays, or if other remote controls that use infrared rays are
operated near the unit, this unit and the other devices might not
operate correctly.

Battery installation

1. Remove the battery compartment cover.
2. Insert two AAA batteries. Make sure that they are inserted with
their positive (+) and negative (_) poles oriented correctly.
3. Close the cover.

Battery replacement

If the distance from the main unit that the remote control works
effectively decreases, the batteries are probably exhausted. Replace
the batteries with new ones when this happens.
For more information about the collection of batteries, please contact
your local municipality, your waste disposal service or the place where
you purchased them.
14

Display

CD mode
During playback
Audio CD
Elapsed time of current track (min./sec.)
Currently playing track number
MP3 disc
Currently playing file number
(starting with 001 in each folder)
Currently playing folder number
Currently playing file name
(scrolls when long)
When playback is stopped
Audio CD
Total playing time
Total tracks
MP3 disc
Total number of files
Total number of folders
Elapsed time of current track
(min./sec.)