Teac AD-850 Mode D'emploi page 32

3
Press the RECORD TAPE button to start recording
standby.
The red indicator above the RECORD TAPE button and the
icons on the display blink.
< To stop recording, press the TAPE Stop (H) button.
4
Adjust the recording level.
Before recording, adjust the recording level. Failure to do so
could cause the recorded sound to be distorted or noisy.
1. Play the source (external source) to be recorded.
2. Adjust the REC LEVEL knob so that the peak level meter never
exceeds 0 continuously.
< Different sources to be recorded have different volumes. In
order to record at the optimal volume for each source, it is
necessary to adjust the recording level for each source.
32
Recording on a cassette tape (continued)
5
Prepare a recording source.
Recording from a CD
To record all the tracks/files on a CD, stop the disc first. To record
only some of the tracks/files on a CD, pause at the beginning of
the part that you want to record.
You can also record tracks in programmed order. For information
about how to set the program, see page 21.
Recording from a USB flash drive
To record the entire contents of the USB flash drive, stop the
unit. To record from the middle of the USB flash drive, pause at
the point from where you want to start recording.
You can also record tracks in programmed order. For information
about how to set the program, see page 21.
< See page 40 for information about the playback order of
MP3 files.
Recording from an external source
Prepare to start playback of the source device.
Example: Set the source selection of an amplifier.
Set the playback media in a connected player.
To record from a tuner, tune in a station.