Basic Operation - Teac CD-P1260MKII Mode D'emploi

1
Press the POWER switch to turn the unit on.
< Playback begins automatically if a disc is already inserted.
2
Press the OPEN/CLOSE button (L) to open the tray.
3
Place a disc on the tray with the label side up.
< Never place more than one disc on the tray.
< The disc must be centred on the disc tray. If the disc is not
correctly loaded, it might not be possible to open the tray again
after it has been closed. Confirm that the disc is always centered
on the tray before closing it.
< Do not force the tray by hand when opening and closing it.
10

Basic operation

4
Press the OPEN/CLOSE button (L) to close the tray.
< After closing the tray, loading the disc takes a few seconds. No
buttons will work while loading. Wait until the total number of
tracks/files is displayed.
< When no disc is loaded in the CD player, "
When an audio CD is loaded
When an MP3/WMA disc is loaded
5
Press the Play/Pause button ( y / J ) to start playback.
Playback starts from the first track/file on the disc.
< MP3/WMA files that are not in folders are automatically put in
the "ROOT" folder. Playback starts from the first file in the ROOT
folder.
< When playback of all the tracks/files has finished, the unit stops
automatically.
< See page 21 for information about the playback order of
MP3/WMA discs.
Total tracks Total playing time
Total number of folders
Total number of files
" is displayed.