SilverCrest SKRI 2000 A1 Instructions D'utilisation Et Consignes De Sécurité page 140

Handling and operation
Button lock
You can lock the buttons of the appliance so that settings cannot be altered by
unauthorised people.
♦ Press and hold the button Mode / Lock
the remote control, for at least two seconds to switch the button lock either
on or off . When the button lock is switched on, in the display
♦ To release the lock, press and hold the button Mode / Lock
Lock button
Bass accentuation
With the bass accentuation you can switch on an enhanced playback of the low
frequencies.
♦ For about 2 seconds press the button
iTime Sync Bass
on or off . With bass accentuation switched on, the symbol
in the display.
Alternating display
Prerequisite: The appliance is in the operational mode clock/standby operation.
♦ Press the button
control, the date and time are indicated alternately.
♦ Press the button
control, once more and only the time is indicated.
Prerequisite: The appliance is in the radio operational mode.
♦ By pressing the button Mode / Lock
the remote control, the reception frequency resp. the station name (for RDS
reception) and the time are displayed alternately.
♦ Press the button Mode / Lock
control, once more to only indicate the time.
♦ Press the button Mode / Lock
control, once more to indicate only the reception frequency resp. the station
name (for RDS reception).
SKRI 2000 A1
appears.
on the remote control, for at least two seconds.
45
on the remote control, to switch the bass accentuation
43
/ Down
i i
/ Down
i i
, or the Mode Lock button
11
Bass
i-Time Sync i-Time Sync
, or the / Down button
19
, or the / Down button
19
, or the Mode Lock button
11
, or the Mode Lock button
11
or the Mode Lock button
11
on
45
the symbol
, or the Mode
11
, or the button
12
appears
on the remote
32
on the remote
32
on
45
on the remote
45
on the remote
45
137
GB