Printing Interval - Chauvin Arnoux C.A 25 Mode D'emploi

Measurement
units
Hz
tr/min or RPM
m/min
Measurement
units
ft/min
1 ft = 0.3048 cm
1 m = 3.281 ft
Printing interval (C.A 27 only)
The programming of the Scanning function makes it possible to obtain the output
of the measured values on the printer, according to a predefined rate.
The printer is connected to the RS 232 output. (See paragraph 7 for the use of the
E2 printer).
This function is programmed by pressing the
ming mode. The SCAN symbol must appear on the display.
Max F input
giving a Max
display of
Min F input
giving a Min
display of
Max F input
giving a Max
display of
Min F input
giving a Min
display of
Max F input
giving a Max
display of
Min F input
giving a Min
display of
74
Coefficient Programmed K
0.01
9999.9 Hz
99 999 counts
0.1 Hz
0.0010 pts
10 000 Hz
6000,0 counts
0.1 Hz
0.0600 counts
Coefficient Programmed K
0.033
10 000 Hz
19 800 counts
0.1 Hz
0.1980 counts
SCAN
button on program-
99.999
1 000 Hz
99 999 counts
0.1 Hz
9.9999 pts
16.666 Hz
99 999 counts
0.1 Hz
599.99 counts
32.81
50.8 Hz
99 999 counts
0.1 Hz
196.86 counts