Erasing The Memory; Printing Results (Print/Print Mem); Immediate Printing Of A Measurement (Print) - Chauvin Arnoux C.A 6250 Notice De Fonctionnement

3.6.2 Erasing the memory

Two possibilities : - erase all stored data
- erase the content of an OBJECT number.
erasing all stored data
I
- in the SET-UP menu, select the nEn parameter
- press the4key and, on the main display unit, select CLr using the 5key.
- confirm by pressing4key
- the instrument asks you to confirm by CLr Y to execute this function :
- if yes, press the4key
- if no, select CLr n by pressing the 5key and confirm by pressing the4key
erasing the content of an OBJET number
I
- in the SET-UP menu, select the nEn parameter
- press the 4 key and, on the main display unit, select CLr 0 using the5key.
- confirm by pressing the4key
- the last OBJ number flashes; it can be changed using the 56key
- confirm by pressing the4key
- the instrument asks you to confirm by CLr Y to execute this function :
- if yes, press the4key
- if no, select CLr n by pressing the 5key and confirm by pressing the4key
3.7 PRINTING RESULTS (PRINT / PRINT MEM)
Two printing modes are available:

- immediate printing of a measurement (PRINT),

- printing of stored data (PRINT MEM).
If transmission of the data to the printer goes well, the COM symbol flashes on the display unit.
If a problem occurs, the symbol COM remains on steadily on the LCD screen.
3.7.1 Immediate printing of a measurement (PRINT)
Following a measurement or after the MR (memory retrieval) mode is accessed, the PRINT function
can be used to print the measurement results.
When the key is activated, the measurement is printed, along with the measurement conditions and
R(θ) if the function was activated).
To stop printing, change the setting of the rotary switch.
Below is a printing ticket form:
38