Scratch-Function; Anti-Shock Memory - MC Crypt CMP-950RUSB Notice D'emploi

10. Commissioning
k) Scratch Function
• Press the button VINYL to activate the scratch function.
• If you move the JOG wheel (2) during playback, you can scratch as you would with a record player. This describes
the rhythmic moving back and forth of a record on the turntable with the pick-up needle in place.
l) Switching off the Player
• Interrupt playback by pressing the PLAY/PAUSE button
• If required, press the OPEN/CLOSE button (24) of the respective drive and remove the CD.
• First, switch off the amplifier and then the mixing desk, if connected.
• Now switch off the player using the power switch (1).

11. Anti-shock Memory

The device is equipped with a digital anti-shock memory. This reduces the risk of interruptions during CD playback
when the device is subjected to vibrations.
The anti-shock memory is loaded automatically when the audio data is read from CD. The device needs a few
seconds until the memory is full to work optimally.
The memory stores up to 20 seconds of music. The anti-shock memory plays on the CD in case of blows that would
otherwise cause an interruption.
|| (11).
45