MC Crypt CMP-950RUSB Notice D'emploi page 36

6. Connections and Control Elements
(20) SINGLE/CONTINUE button
Use this button to switch the player between individual SINGLE-track playback and continuous (CONTINUE) track
playback.
For single track playback, the device enters pause mode after each track played.
For continuous playback, the device enters pause mode only after playing all tracks.
The playback mode is displayed (17).
(21) FOLDER/TRACK button
Use this button to find folders or tracks in MP3 mode.
When the button is depressed (button is lit), use buttons |
folder number is displayed (17).
When the button is not is depressed (button is not lit), use buttons |
number and the title (only in MP3 mode) are displayed (17) as well.
(22) SD card reader
Insert the SD card here.
The device can read SD and SDHC cards with a storage capacity of no more than 32 GB.
The SD card must be formatted in FAT16 or FAT32.
(23) USB interface
Insert the USB storage medium here.
The device can read USB storage media with a storage capacity of no more than 32 GB.
The USB storage medium must be formatted in FAT16 or FAT32.
The maximum current capacity is 1A. If you want to connect a USB drive, ensure that the max. current
input of the hard drive is not above 1A. If this is the case, the hard drive must be supplied through an
external power line.
36
| (10) to find a folder on the MP3 CD. The
(9) and
(9) and
| (10) to find a track. The track