MC Crypt CMP-950RUSB Notice D'emploi page 34

6. Connections and Control Elements
(7) OUT button
The device allows you to save a „seamless" play loop. For this purpose, the device has the buttons IN (6), OUT (7)
and RELOOP (8).
Use the OUT button to program the end point of the play loop or quit the play loop by pressing it once again.
A detailed description of the "LOOP" function can be found under "LOOP function" in one of the
following chapters in this manual.
(8) RELOOP button
Use this button to play the saved play loop.
A detailed description of the "LOOP" function can be found under "LOOP function" in one of the
following chapters in this manual.
(9) |
button
Use this button to select a track.
Press this button to jump to the beginning of the current track or to the previous track.
| button
(10)
Use this button to select a track.
Press this button to jump to the next track.
(11) PLAY/PAUSE button
Use this button to start or pause playback.
During playback, the button is lit, during pause, it flashes.
(12) CUE button
The player sets a CUE mark each time it starts playback
If you press the CUE button during playback, the player returns to the CUE mark and goes into pause.
If you hold down the CUE button when at the CUE mark, playback starts from the CUE mark.
After releasing the CUE button, the player returns to the CUE mark and pauses.
34
||