Accessories - DeWalt 52051 Guide D'utilisation

Fig. O
5. Remove the piston from the barrel.
Fig. P
6. Remove the rubber stop and rubber stop holder
from the piston assembly. Inspect all parts for wear of
damage and clean or replace as required. Use cleaning
solvent and cleaning brushes to remove dirt and
powder residues. Wipe all parts dry before reassembly.
Wear safety goggles when cleaning tool parts.
7. Check the piston tip for damage and grind flat. The tip
of the piston must be 90˚ to the shank. Grinding should
only be done by qualified personnel. The minimum
overall length of the piston must not be less than 4‑7/8"
(124 mm) long. When less than 4‑7/8" (124 mm) long,
the piston must be replaced.
8. Reassemble the tool in the reverse order of disassembly.
When sliding the piston guide and spring into the
housing, align the slot in the barrel with the slot in the
tool housing and install both stopper returns and the
steel liner nut.

Accessories


WARNING: Since accessories, other than those
offered by D WALT, have not been tested with this
e
product, use of such accessories with this tool could be
hazardous. To reduce the risk of injury, only D
recommended accessories should be used with
this product.
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center. If you need assistance in locating any
accessory, please contact D
Co., 701 East Joppa Road, Towson, MD 21286, call
1‑800‑4‑D WALT (1‑800‑433‑9258) or visit our website:
e
www.dewalt.com.
52053 6' Pole Tool for Sniper
52061 8' Pole Tool for Sniper
e
WALT Industrial Tool
e
Repairs

WARNING: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement, when
applicable) should be performed by a D
service center or a D
Always use identical replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
•
WARRAnTY sERViCE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with your product.
•
COnFiRMATiOn OF OWnERshiP: In case of an
insurance loss, such as fire, flood or theft, your
registration of ownership will serve as your proof
of purchase.
•
FOR YOUR sAFETY: Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
Safety Act.
Register online at www.dewalt.com/register
Three Year Limited Warranty
D WALT will repair or replace, without charge, any defects
e
due to faulty materials or workmanship for three years from
the date of purchase. This warranty does not cover part
failure due to normal wear or tool abuse. For further detail
of warranty coverage and warranty repair information,
visit www.dewalt.com or call 1‑800‑4‑D
(1‑800‑433‑9258). This warranty does not apply to
accessories or damage caused where repairs have been
made or attempted by others. THIS LIMITED WARRANTY
IS GIVEN IN LIEU OF ALL OTHERS, INCLUDING THE IMPLIED
WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, AND EXCLUDES ALL INCIDENTAL
OR CONSEQUENTIAL DAMAGES. Some states do not allow
limitations on how long an implied warranty lasts or the
exclusion or limitation of incidental or consequential
damages, so these limitations may not apply to you. This
WALT
warranty gives you specific legal rights and you may have
other rights which vary in certain states or provinces.
90 DAY MOnEY BACK gUARAnTEE
If you are not completely satisfied with the performance of
your D WALT Power Tool or Nailer for any reason, you can
e
return it within 90 days from the date of purchase with a
receipt for a full refund – no questions asked.
lATin AMERiCA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country specific warranty information contained in
the packaging, call the local company or see website for
warranty information.
FREE WARning lABEl REPlACEMEnT: If your warning
labels become illegible or are missing, call 1‑800‑4‑D
(1‑800‑433‑9258) for a free replacement.
English
WALT factory
e
WALT authorized service center.
e
WALT
e
WALT
e
11