Exquisit WA 6012 A+ Manuel D'exploitation page 47

Remove a trash from the filter, and flush the filter under the water jet.
Insert the plug in the hose and the filter itself in the Machine in reverse sequence. Check the correctness
of filter's installation and its hold lock. Close the filter's cover.
8 SAFETY REQUIREMENTS
The Machine is household electric appliance. Therefore, general rules of electrical safety should be
observed when Machine being in service.
Machine's degree of protection against electric shock is I.
Before plug in, check visually for absence of Machine's power cord damages. The power cord should
not be over-bended and over-squeezed.
The Machine is not designed for use by handicapped persons (including children), people having
degraded sensorial and mental abilities, and with insufficient experience and incomplete knowledge also,
in case if above persons are not under supervision, or do not receive instructions from persons responsible
for their safety.
Keep your Machine away from use in children games.
If the supply cord is damaged, it must be replaced by a special cord or assembly available from the
manufacturer or its service agent.
Safety precautions should be taken when moving and transporting the Machine as it has a great
weight.
CAUTION! Do not use Machine as a trestle, pedestal, etc.
IT IS FORBIDDEN to place the Machine outdoor in order not to expose it to weather.
IT IS FORBIDDEN to operate Machine without installing the plastic plugs.
When Machine's connecting to the system of cold-water supply, use new filling hose only.
IT IS FORBIDDEN to operate Machine by kids.
IT IS FORBIDDEN to use solvent-containing washing agents inside the Machine as they can cause
explosion.
Avoid to touch the Machine's door glass as it can be hot, thus causing burn.
Upon completion washing, press the button
electric main, remove the electrical plug from the receptacle, and water delivery cock.
To assure electrical safety and fire prevention regulations to:
– plug in the Machine when electrical overload protection of the electric main is faulty;
– use the receptacle, for Machine plug in, without ground contact;
– use adapter connectors, multiplug-type (having two or more sockets) receptacles, and extension cords;
– plug in and take off the electrical plug from the receptacle by wet hands;
– touch the running Machine by wet hands;
– wash out the Machine by the water jet;
cover
Figure 20
in accordance with Figure 3, cut out the Machine from
cover
hose
container
plug
Figure 21
knob
EN
�lter
47