Exquisit WA 6012 A+ Manuel D'exploitation page 37

To prevent high vibrations and noise, electronic control system is provided in the Machine, before every
spinning it uniformity arrange the laundry' in the drum.
The door is provided with block system designed for pretension from shutting. This system prevents
authorized Machine's using, for instance, by kids.
Protective system in the Machine detects the presence of probable water leakage in the filling hose.
DISPLAY
Following zones are situated on the display in accordance with Fig. 3:
A — water consumption indication zone;
B — electrical power consumption indication zone;
C — washing program and temperature indication zone;
D — spin RPM indication zone;
I — auxiliary operations indication zone;
F — time indication zone.
Washing program and its basic parameters highlighted in the display are listed in Table 4.
Flashing of the washing parameters on display accompanies their selection. Flashing stops when
selected parameters are confirmed by Knob axial pushing or button
SELECTION OF DISPLAY LANGUAGE
Select language of text information on display after first activation of your Machine. To select the lan-
«
guage push button
desired language name (FRANCAIS, ENGLISH, DEUTSCH, NETHERLANDS) by Knob turning and confirm your
choice by its axial pushing. The selected language of text information is saved for subsequent activations.
PROGRAM SELECTION
Washing program selection is performed by the Knob in accordance with Figures 2 and 3. The Knob
turns in both sides: clockwise and contraclockwise.
"COTTON 60 °C 1200 rpm " program to be highlighted when Machine is being switched on. When the
Knob turns clockwise, washing program names are highlighted in series in zone C. To confirm the program
selection, push the Knob axially. By this, the selection goes to the new parameter.
TEMPERATURE SELECTION
Assignment of the washing temperature value below the maximal level stipulated by the washing
program in accordance with detergent producer's recommendations is provided in the Machine.
On confirmation of the washing program selection, the temperature value in Celsius degrees begins
to blink in zone C. When the Knob turns, temperature value is changed from maximal to minimal gradually:
"CLD" at interval of 10 °С. On selection of desired temperature of washing, push the Knob: sound signal
zone B
zone А
ON/OFF button
reset button
and hold it for 2 seconds – current language name highlighting is doing on. Select
zone C
Program selection knob
Figure 3 – Display
«
pressing.
zone D
zone I
zone F
memory button
selection button
EN
37