Zehnder ComfoAir 70 Instructions De Montage page 11

ComfoAir 70
Disconnect the plug-in connector
part with the screw-type terminals
and connect the wires of the on-
site cable. Make a note of the
colour coding.
Connect the wires of the
connecting cable to the BUS
X7 spring-type terminals on the
control board according to the
colour coding.
Connect both parts of the plug-in
connector together and pass the
connecting cable into the electrical
connection area of the unit.
Push the unit into the wall
mounting pipe as far as it will go,
taking into account the electrical
connections.
External control panel
11