Assembly Of Etude Medley - Invacare Etude Medley Manuel D'utilisation

3. Assembly of Etude Medley

(see illustration 1, 2a, 2b and 2c in front of the users manual)
a) Mattress support
Place the two inserts in the head end of the mattress support. The inserts must be mounted in such a way
•
that one extends further out of the side tube than the other.
Loosely screw in the two finger screws.
•
Push the foot end of the mattress support onto the two inserts.
•
Tighten the two finger screws.
•
Retighten the two finger screws at the head end of the top frame.
•
Attach the two mattress support handles to the mattress support.
•
b) Bed end
Turn the locking rings on the bed ends to the position "open".
•
Latch the mattress support to the bed ends and press firmly into position.
•
Turn the locking rings to the position "locked".
•
c) Control unit
The control unit is latched to the backrest motor.
The control unit is provided with a label with symbols showing where to connect the plugs:
Backrest motor.
•
Thigh section's motor (on 4-sectioned beds).
•
Bed end motors.
•
Hand control.
•
Position locked
10