Ingeteam INGEREV GARAGE Basic GB120-C1 Manuel D'installation Et Usage page 23

Installing and connecting the unit
2. Connect the power cables to the terminal block as shown in the following figure. The terminal blocks are
clamp type. Insert a flat-head screwdriver to free it and insert the cable in the indicated hole. Tighten it
using the screwdriver.
Single phase charging station. In three phase stations the connection terminals are R (phase R), S (phase S), T (phase T), N (neutral)
3. Screw the bottom cover onto the unit and tighten the packing glands in order to correctly secure the
cable.
ABA2021IQM01_A - Installation and Operation Manual
T: Ground
L: Live
N: Neutral
and PE (ground).
Ingeteam
EN
ES
FR
IT
23