Ingerev Garage Wall / Ingerev Garage One; Installing The Unit - Ingeteam INGEREV GARAGE Basic GB120-C1 Manuel D'installation Et Usage

Installing and connecting the unit
3. Screw the bottom cover onto the unit and tighten the packing glands in order to correctly secure the
cable.
When the charging station has been charging for two seconds its LEDs will light up red, blue and green. After a
brief status check, the light turns to green. The station is ready and awaits identification from the user in order to
begin charging.
If the station identifies any operating anomaly, the light turns red.

7.3. INGEREV GARAGE Wall / INGEREV GARAGE One

7.3.1. Installing the unit

1. In order to mount the unit, it is necessary to install a support on the wall using three fastening elements.
After carrying out this operation, hang the unit from the support.
ABA2021IQM01_A - Installation and Operation Manual
Ingeteam
EN
ES
FR
IT
21