Jennair Rise JGRP648HL Instructions D'installation page 32

10. Push down on the clip on the electrode bracket.
A. Oven bake burner electrode bracket
B. Electrode bracket clip
11. Replace oven bake burner electrode inside bracket.
B
A
A. Oven bake burner electrode
B. Oven bake burner electrode bracket
12. Reinstall the oven bake burner and oven bake burner
screws. See Step 4 for illustration.
13. Replace oven baffle and oven baffle nuts. The front holes will
be aligned, and a click will sound when baffle is seated.
32
B
A
Replace Oven Bake Burner Cover
1. Align notches on the oven bake burner cover with shoulder
screws in the bottom of the oven.
A B
A. Cover notches (4)
B. Shoulder screws (4)
2. Lower cover, and slide to left or right to slide shoulder
screws into the narrow ends of the notches, then lock
into place.
A
A. Bake burner cover
Convert Oven Broil Burner (30" [76.2 cm] and 36"
[91.4 cm] models and the right oven cavity on 48"
[121.9 cm] models)
1. Using a 1/4" (6.4 mm) nut driver, remove broil burner screw.
Set aside with side igniter positioned on the right.
A
B
C
A. Broil burner screw
B. Broil burner
C. Broil burner orifice hole
A
B