Jennair Rise JGRP648HL Instructions D'installation page 21

10. Check that the control console is flush with the top edge of
the range.
A
A. Flush with range top
11. Replace the screws on each side of the control console.
12. Replace the control knobs and bezels.
13. Replace burner grates.
Convert Oven Bake Burner (30" [76.2 cm] and 36"
[91.4 cm] models and the right oven cavity on 48"
[121.9 cm] models)
1. Slide the bake burner cover to the right or left.
A
A. Bake burner cover
2. Lift up and remove oven bake burner cover, and set aside.
3. Using a 1/4" (6.4 mm) nut driver, unscrew oven baffle nuts
and remove oven baffle. Set aside.
A. Oven baffle
B. Oven baffle nuts
A
B
4. Remove the oven bake burner screws and oven bake burner.
Rotate burner 90° to the left, and gently lay on its side.
A. Oven bake burner screws
B. Oven bake burner
C. Oven bake burner electrode bracket
D. Oven bake burner electrode
5. Lift up clip on the oven bake burner electrode bracket with a
finger or flat-blade screwdriver, and pull away the electrode.
A. Oven bake burner electrode bracket
B. Electrode bracket clip
D C
A B
B
A
21