STERWINS EHT2-60.4 Notice De Montage, Utilisation Et Entretien page 182

FR
ES
PT • TO REDUCE THE RISK OF INJURY ASSOCIATED WITH CONTACTING ROTATING
PARTS, ALWAYS STOP THE MACHINE, DISCONNECT THE POWER PLUG, AND
MAKE SURE ALL MOVING PARTS HAVE STOPPED:
IT
- BEFORE CLEANING OR CLEARING A BLOCKAGE
2.11 RESIDUAL RISKS
EL
• FAMILIARISE YOURSELF WITH THE USE OF THIS PRODUCT BY MEANS OF
THIS INSTRUCTION MANUAL. MEMORISE THE SAFETY DIRECTIONS AND
FOLLOW THEM TO THE LETTER. THIS WILL HELP TO PREVENT RISKS AND
PL
HAZARDS. ALWAYS BE ALERT WHEN USING THIS PRODUCT, SO THAT YOU CAN
RECOGNISE AND HANDLE RISKS EARLY. FAST INTERVENTION CAN PREVENT
SERIOUS INJURY AND DAMAGE TO PROPERTY. SWITCH OFF AND DISCONNECT
RU
FROM THE POWER SOURCE IF THERE ARE MALFUNCTIONS.
• EVEN IF ALL INSTRUCTIONS ARE STRICTLY FOLLOWED, THERE ARE STILL
SOME FACTORS THAT COULD LEAD TO HAZARDS, SUCH AS :
KZ
- THROWN OUT PIECES OF THE WORK PIECE.
- VIBRATION INJURIES : USE DESIGNATED HANDLES AND TRY TO REDUCE
WORKING TIME AND EXPOSURE.
UA
- INJURIES CAUSED BY NOISE : WEAR EAR PROTECTION AND REDUCE
WORKING TIME AND EXPOSURE.
RO
2.12 TECHNICAL DATA
EN
Net weight (without packaging)
Measured sound pressure level
Measured sound power level
Vibration level (K=1.5m/s
IF THE PRODUCT IS DROPPED, SUFFERS HEAVY IMPACT OR
BEGINS TO VIBRATE ABNORMALLY, IMMEDIATELY STOP THE
PRODUCT AND INSPECT FOR DAMAGE OR IDENTIFY THE CAUSE
OF THE VIBRATION. ANY DAMAGE SHOULD BE PROPERLY
REPAIRED OR REPLACE BY AN AUTHORIZED SERVICE CENTRE.
Model
Rated voltage (V)
Rated power (w)
Max cutting capacity
Blade length
Tooth distance
No-load speed (min -1 )
- WHEN LEAVING THE PRODUCT UNATTENDED
- BEFORE INSTALLING OR REMOVING ATTACHMENTS
- BEFORE CHECKING, MAINTAINING OR WORKING ON THE PRODUCT
- INHALATION OF DUST AND PARTICLES.
- WEAR EYE PROTECTION AT ALL TIMES.
IF YOU EXPERIENCE ANY OF THESE FACTORS WHILE USING THE MACHINE,
STOP THE MACHINE CONSULT YOUR DOCTOR IMMEDIATELY
• INJURIES MAY BE CAUSED OR AGGRAVATED BY PROLONGED USE OF A
TOOL. WHEN USING ANY TOOL FOR PROLONGED PERIODS, ENSURE YOU TAKE
REGULAR BREAKS.
• PROLONGED USE OF THE PRODUCT EXPOSES THE USER TO VIBRATIONS
THAT CAN CAUSE A RANGE OF CONDITIONS COLLECTIVELY KNOWN AS HAND-
ARM VIBRATION SYNDROME (HAVS) E. G . FINGERS GOING WHITE; AS WELL AS
SPECIFIC DISEASES SUCH AS CARPAL TUNNEL SYNDROME.
• TO REDUCE THIS RISK WHEN USING THE PRODUCT, ALWAYS WEAR
PROTECTIVE GLOVES AND KEEP YOUR HANDS WARM.
L
L
WA
2 )
182
EHT2-60.4
220-240V~50Hz
650W
27 mm
60cm
35mm
3.9kg
: 83,4dB (A) K : 3,0dB (A)
pA PA
: 96,8dB (A) K : 2,61dB (A)
WA
4,976 m/s 2
1700