Warranty - Abicor Binzel xFUME FLEX Mode D'emploi

14 Warranty

14 Warranty
This product is an original ABICOR BINZEL product. Alexander Binzel Schweisstechnik GmbH & Co. KG
guarantees correct manufacture and assumes a factory production and function warranty for this product
upon delivery, which is in line with the most current technology and the regulations in force. If
ABICOR BINZEL is responsible for a defect that is present, ABICOR BINZEL is obliged to remedy the defect
or deliver a replacement at its own cost and its own discretion. The warranty covers manufacturing faults,
but not damage resulting from natural wear and tear, overloading or improper use. The warranty period is
defined in the General Terms and Conditions. Exceptions in the case of specific products are regulated
separately. Warranty will also be rendered invalid if spare parts and wear parts are used that are not
original ABICOR BINZEL parts and if the product has been repaired improperly by the user or a third party.
Wearing parts are excluded in general from the warranty. In addition, ABICOR BINZEL is not liable for
damage caused by using our products. Questions about warranty and service can be addressed to the
manufacturer or our distributors. For more information, visit www.binzel-abicor.com.
EN - 26
xFUME™ FLEX