Step 2. Connect The Automatic Document Feeder (Adf) - HP Scanjet 8300 Série Guide D'installation

(continued)
9 Automatic document feeder (ADF) cleaning cloth (HP Scanjet 8350 Flatbed
Document Scanner and HP Scanjet 8390 Flatbed Document Scanner only)
10 Setup and Support Guide (this book)

Step 2. Connect the automatic document feeder (ADF)

The automatic document feeder (ADF) is included with the HP Scanjet 8350 Flatbed
Document Scanner and HP Scanjet 8390 Flatbed Document Scanner. The ADF can be
purchased separately for the HP Scanjet 8300 Professional Image Scanner.
1. Hold the ADF in the open position (a 70 degree angle relative to the scanner bed).
Align the hinge posts on the ADF with the sockets on the scanner, and then gently
lower the ADF onto the scanner. The two hinge posts on the ADF fit in the sockets
on the scanner.
Caution
must be installed in the opened position as described in step 1. Keep fingers
away from the ADF hinges.
2. After installing the ADF, lower the ADF to the closed position.
3. Install the ADF input tray.
Setup and Support Guide
Do not attempt to install the ADF in the closed position. The ADF
5