Télécharger Imprimer la page

Okamura Contessa II Mode D'emploi page 24

Publicité

GB
Problem
Check
The arm cannot
be lowered.
(Refer to the procedure on page
The height of
35, 36.)
right and left
arm differs.
Are you using soft casters on a rug
or carpet?
Casters do not
move smoothly.
Are they tangled with lint or wool?
Casters are
Are you using hard casters on hard
slippery.
floors such as ceramic tiles?
Chair makes
-
noise.
 Please contact an official dealer.
45
Troubleshooting
Solution
Lift up the arm to the highest position
to lower the arm to the lowest
position. Then lift up the arm for
adjustment.
Use hard casters.
Remove lint or wool or replace the
casters.
Use soft casters.
Visit a retail shop or the nearest
branch.
D
 Drehstuhl (5 Beine/Hoher Stuhl/4 Beine mit automatischer Rückkehrfunktion)
Page
35, 36
Rückenlehne
Sitz
Stützbasis
Fuß
Bauteile
Verstellbare
Armlehne
Nicht
verstellbare
Armlehne
Kleiderbügel Hauptteil
Lendenwirbelstütze
Kleine
Kopfstütze
Große
Kopfstütze
Materialien
Teil
Materialien
Allgemeine Spezifikation
Rahmen
Metall (Aluminium)
Gewebetyp
Geweberahmen Nylon
Ledertyp
Innere Schale Polypropylen
Polstertyp
Innere Schale Nylon
Gewebetyp
Rahmen
Nylon
Allgemeine Spezifikation
Rahmen
Nylon
Hauptteil
Metall (Aluminium)
Abdeckung
Polypropylen
Poliert
Metall (Aluminium)
Lackiert
Metall (Aluminium)
Poliert
Metall (Aluminium)
Installationsbereich
Lackiert
Metall (Aluminium)
Poliert
Metall (Stahl)
Stütze
Lackiert
Metall (Stahl)
Hauptteil
Nylon
Polster
Polyurethan
Poliert
Metall (Aluminium)
Hauptteil
Lackiert
Metall (Aluminium)
Polster
Polyurethan
Nylon
Hauptteil
Nylon
Polster
Polyurethan
Hauptteil
Nylon
Polster
Polyurethan
Hauptteil
Nylon
Ledertyp
Polypropylen
Oberflächenbehandlung
Eingebrannte Beschichtung
(Polyester)
Eingebrannte Beschichtung
(Polyester)
Eingebrannte Beschichtung
(Polyester)
Verchromt
Eingebrannte Beschichtung
(Polyester)
Eingebrannte Beschichtung
(Polyester)
46

Publicité

loading