Typical Ccd Phenomena - Sony ExwaveHAD DXC-390 Mode D'emploi

Typical CCD Phenomena

The following phenomena may appear on the monitor
screen while you are using the DXC-390 color video camera.
These phenomena stem from the high sensitivity of the CCD
image sensors, and do not indicate a fault within the camera.
Vertical smear
A "smear" may appear to extend vertically from very bright
subjects, as shown below.
Video monitor
screen
This phenomenon is common to CCD imaging elements
using an interline transfer system, and is caused when
electric charge induced by infrared radiation deep within the
photo sensor is transferred to the resistors.
52
(GB) Chapter 4 Appendix
Aliasing
When shooting fine stripes, straight lines or similar patterns,
the lines may become slightly jagged.
Blemishes
A CCD image sensor consists of an array of individual
picture elements (pixels). A malfunctioning sensor element
will show up as a single pixel blemish in the image. This is
generally not a problem.
Pale vertical
smear
White speckles
When you shoot a poorly illuminated object at a high
temperature, small white dots may appear all over the entire
screen image.
Very bright subject
(such as an electric
lamp, fluorescent
lamp, sunlight, or
strong reflected light)